Q＆A
Others
Silver Matte (Silver Liquid)
After firing, the coating peeled off and came off.
If you apply PS40-W3 too thickly, the coating becomes prone to peeling because it won't form a proper film thickness. Please use E-2105P instead.
After firing, the color is poor and it appears to have almost disappeared
Silver liquid is best fired at a low temperature, around 720°C. Also, if the coating is too thin, it can disappear, so make sure to apply it at the appropriate thickness.
After applying, brush marks are visible.
If the coating is applied too thinly, brush marks can become more visible. Try applying it a bit thicker.
Serato Pen
The pen suddenly stopped drawing while I was using it.
The pen may not be working due to a lack of gold liquid, or the pen tip may have dried out. If it's the latter, you can restore it by soaking the tip in solvent. Red pens tend to dry out more easily, so make sure to close the cap tightly when storing
Liquid is dripping from the pen tip.
If you knock the pen too hard, excessive ink will be dispensed, so be sure to tap gently and moderately
If you keep pressing the knock, the pen tip gets clogged and won't come out.
The spring inside the pen has deteriorated, so please discontinue use and start using a new one.
Cut Blue
・Cut blue is a masking agent that is applied to areas where you don't want gold liquid, etc., to be applied. Once it has dried sufficiently, even if gold liquid is applied on top, it can be peeled off
Even when using Cut Blue, liquid gold may still adhere.
This could be due to the coating being too thin or insufficient mixing of the liquid.Please ensure the liquid is well mixed and apply a slightly thicker layer.
